FuzePlay Star Diffraction Glasses are patented to ensure the best quality, craftsmanship, and most importantly the best diffraction effect on the market. Created with the future in mind, these stylish Star Diffraction Glasses capture the essence of a space and allow you to see light in a new and exciting way!
Typically worn by Zubi and welcomed members of the Zubiship, FuzePlay Star Diffractions Glasses use a patented kind of lens to diffract light into any shape you can imagine. The lens works similar to a prism, splitting white light into its component colors. This means that whenever you put these glasses on and look at a Zubi Flyer LED or similar sharp light source, you will see a smiley star starring back at you enhancing your Build. Hack. Play experience.
Unrivaled by other space explorers, FuzePlay Star Diffraction Glasses provide a patented star diffraction diffraction effect. The gradient light diffraction effect in these glasses is layered between two hard plexi-plastic panels for protection. The laser etching process provides optimum light diffraction that presents a crisp, clean, and even effect from edge to edge. These glasses are essential for any new space exploring engineer.
Made from nearly space grade PVC plastic (JK about the space grade, but check out THIS cool article on how real Space Shuttle Tiles work) to ensure that your glasses will withstand a long life of exploring electronics and programming your Zubi Flyer. The FuzePlay PVC frame safeguards the Star Diffraction Lenses and are sturdy enough to withstand even the craziest of asteroid belts. The frame sits comfortably and securely on your face, and will gladly withstand a faster-than-light warp drive to a future destination!
The Zubi Flyer is the bomb dot com for makers: 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V. The onboard switch-mode boost regulator is designed to operate on 3 Volts. Power can be supplied from a 3 Volt CR123A battery or from a USB cable that provides regulated +5 Volts DC to the board. Do not run any power exceeding 5 Volts as the regulator cannot handle step-down voltage.